LCD-420
includes cable and backlight.

LCD420 Dimensional Drawing

LCD-216
includes cable and backlight.

LCD216 Dimensional Drawing

LCD216 and LCD420

These two low cost alphanumeric display modules are with yellow green LED backlight. Both modules are supplied with the 2 feet ribbon cable and plug for immediate connection to a T100MD+ PLC's built-in LCD port. A backlight current limit resistor is also included in the package.

Programming the display is unbelievably easy! All that is needed is to  execute the TBASIC command once :

    SETLCD r, c, <text string> 

where r is the row number and c is the column number, followed by a text string which can be any ascii text or numerical values converted into text string using the STR$(n) or HEX$(n) command. This allows the LCDs to display any internal data for intelligent operator interface.

1. See a programming example utilizing the LCD.
2. Download ASCII Character Table for LCD Display
   (Required for displaying special characters)

MDS100 - RS485 driven 4 lines x 20 Characters serial LCD

If you require more than 1 LCD display, or if the display need to be located at a long distance from the PLC, then the model "MDS100-BW" RS485-driven 4 lines x 20 characters LCD display will be extremely handy. Originally designed as an LCD display for the T100MX+ PLC (which does not have built-in LCD port), the MDS100 can also be readily deployed in the T100MD+ PLC application. The PLC's NETCMD$ command is used to transmit text messages to one or more (up to 255) MDS100-BW very easily. Click here for more information on MDS100-BW